Fit Leg System to Table Top
Prepare product as per page 2:
Please ensure you place table top on a soft flat surface IE: Blanket on the ground, also lift table top
into position do not roll. Place table top [1] upside down and locate the four (4) threaded holes,
take leg system and line up the holes, Then by hand insert bolt and washer [A], ensure to thread
correctly turn 2-3 times. To test if gripped pull back lightly. DO NOT TIGHTEN YET, please fit the
other 3 bolts with same method. Once all 4 bolts are seated correctly, take tool [D] and tighten,
not do not overtighten. Note you will need to tighten the bolts [B] at junction of legs.
Assembly is now complete.
With the help of a second person lift completed table into the and roll over until feet are level with
ground, now gently lower.
Important that you never drag table always lift to move.
Please see care instruction for timber preparation before putting into use.
6
17ONY02B
ASSEMBLY INSTRUCTIONS
