6
11TOC3S
INSTRUCTIONS-OPERATING OF FUNCTIONS
Instruction start from fully flat position:
Starting from flat position to move to Lounger position.
With a person on each side of sofa, in unison lift backrest up till you hear a
click noise, this should then hold mid way lock.
To go from Lounger position to Sofa position.
With a person on each side of sofa, in unison lift backrest till you hear another
click, again this should then hold at upright position.
To go back to flat or Bed position, you will need to release locking mechanism.
This done by lifting and pushing backrest forward till you here clack.
Once you here the clack lower backrest till flat.
Armrest & split back functions operate the same as above.
Note/Warning:
The ratchet mechanism is designed only to work one way you can only lock the
2 upright positions from flat starting.
So can not go from Sofa position to Lounger position must always go back to
flat position.
If for some reason you do not get a lock position when raising from flat
position.
Lift backrest all the way to the clack release point then back again, sometimes
doing it twice has better success.
