4
11TOC3S
ASSEMBLY INSTRUCTIONS
Please prepare work area as instructed in page 2:
As indicated in diagram below lay front of sofa face down.
You will see a zipper in dust cover, inside you will find a box containing legs
and hardware pack. Once all items are checked against list on previous page,
we can begin to fit legs to metal base. Note legs are angled when fitting
please ensure angle is facing away from sofa. Now take steel leg [1] and aline
holes in plate of leg and plate located in corner of frame, once aligned take
bolt [2] and from underneath insert thru holes, so that open threaded end is
facing upwards. Next add washer [3] by sliding over bolt end. Next take nut
[4] and by hand seat thread correctly on bolt. Note you will notice that one
side of the nut has a coloured nylon ring, that ring should be facing up. Next
take tool [5] and insert into head of bolt from underneath, push up till head of
bolt is flat against frame, then take spanner [4] and tighten nut till flat against
frame. Repeat for all bols and other legs. Assembly complete. With the help
on another person lift and roll complete sofa towards end with legs closest to
edge of sofa until can place on feet. Before use please consult operating
instruction
