1. Align the ends of the lower front side
rail (#5) and the lower back side rail (#6)
to the pre-drilled holes along the sides
of the lower end guardrail (#1,2).
2. Insert the barrel nuts (#C),
use a screwdriver to align
the hole for the bolt.
3. Insert the bolt (#A) into the pre-
drilled holes along the side and
into the barrel nut (#C). Secure
using the Allen wrench (#K). Make
sure to hold the barrel nut with a
screwdriver while securing the bolt.
Front
Back
1. Align the ends of the rail (#6) and
rail (#16) to the upper end guard
rails (#3,4). Insert the barrel nuts
(#C) into the rails, use a screwdriver
to align the hole for the bolt. Insert
the bolts (#A) into the pre-drilled
holes along the outer sides of (#3,4)
and into the barrel nut (#C). Secure
using the Allen wrench (#K). Make
sure to hold the barrel nut with a
screwdriver while securing the bolt.
Do not tighten bolts/screws
until they are all installed.
#B
2. Insert a wood dowel (#I) into
each end of the guard rails
(#17/18). Insert the other end
of the dowels into the holes
along the upper end guard rails
(#3/4), then insert a screw (#B)
into each end and secure using
the Allen wrench (#K).
