Furman RM-8, Руководство пользователя, Страница: 3 / 8

the furman merit series
I N T R O D U C T I O N
Thank you for purchasing a Furman Merit
Series Power Distributor or Conditioner, and
congratulations on your choice. The Merit
Series power conditioners feature excellent
surge protection as well as RFI / EMI filtration.
S A F E T Y I N F O R M AT I O N
To obtain best results from your Furman Merit
Series unit, please read this manual carefully
before using.
WA R N I N G
To reduce the risk of electrical shock, do not
expose this equipment to rain or moisture.
Dangerous high voltages are present inside
the enclosure. Do not remove the covers.
Refer servicing to qualified personnel only.
The lightning flash with an arrowhead symbol
is intended to alert the user to the presence
of un-insulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
I M P O R TA N T S A F E T Y
I N S T R U C T I O N S
(Please read prior to installation)
1. Please read and observe all safety and
operating instructions before installing your
Merit Series unit. Retain these instructions for
future reference.
2. Your Merit Series unit should not be used
near water – for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, near a swimming pool, etc.
3. Do not place your Merit Series unit near
heat sources such as radiators, heat registers,
stoves, or other appliances that produce heat.
4. The Merit Series units should only be
connected to a 120 VAC, 60Hz, 15 amp
grounded electrical outlet. Do not defeat the
ground or change polarization of the power
plug.
5. Route the power cord and other cables so
that they are not likely to be walked on, tripped
over, or stressed. Pay particular attention to
the condition of the cords and cables at the
plugs, and the point where they exit your Merit
Series unit. To prevent risk of fire or injury,
damaged cords and cables should be replaced
immediately.
6. Clean your Merit Series unit with a damp
cloth only. Do not use solvents or abrasive
cleaners. Never pour liquid on or into the unit.
7. Your Merit Series unit should be serviced by
qualified service personnel when:
• The power supply cord or the plug has been
frayed, kinked, or cut.
• Objects have fallen or liquid has spilled into
the unit.
• The unit has been exposed to rain or other
moisture.
• The unit does not appear to operate normally.
• The unit has been dropped, or the enclosure
has been damaged.
• The retractable lights have failed.
8. Your Merit Series unit requires that a safety
ground be present for proper operation. Any
attempt to operate the unit without a safety
ground is considered improper operation and
could invalidate the warranty.
9. Do not attempt to service your Merit Series
unit beyond what is described in this manual.
All other servicing should be referred to
qualified service personnel.
2