Furman P-1800 AR Prestige Serie, Руководство пользователя

Страница: 4 / 28

4
P-1800 AR OWNER’S MANUAL
FURMAN P-1800 AR FEATURES
True RMS Voltage Regulation • - A 15 amp ultra-low noise toroidal autoformer with microprocessor control
SMP • (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown)
LiFT • (Linear Filtering Technology) with zero ground contamination
Nine total regulated, filtered and protected AC outlets (three with “wall wart” spacing and Furman Secure Straps to hold bulky •
transformers in place)
Very low stray magnetic field leakage
•
Dimmable/Switchable true RMS digital ammeter and laboratory precise voltmeter •
Tri-color voltage range indicator (complements numerical voltage reading - even when viewed at a distance from the display) •
Front panel USB connector charges most portable media devices and cell phones •
BNC connector on the rear panel allows you to attach any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of •
your rack (Furman GN-I and GN-LED accessory gooseneck lamps (sold separately) are recommended for this application)
15 amp (1800 watt) current capacity; output capacity 12 to 15 amps
•
Robust 14awg. 10 foot AC cord •
Five year limited warranty •
INTRODUCTION
Thank you for purchasing a Furman Prestige Series Voltage Regulator/Power Conditioner, and congratulations on your choice. The
Prestige Series P-1800 AR features Furman’s True RMS Auto Regulation, Series Multi-Stage Protection (SMP) circuit, and our exclusive
Linear Filtering Technology (LiFT). Together, these technologies comprise precisely what our customers have grown to expect from
Furman: uncompromised protection and purification. The P-1800 AR has been precisely engineered to more than meet the critical
demands of recording studios, broadcast facilities, and discerning musicians alike.
The Furman P-1800 AR is intended to protect sensitive electronic equipment from problems caused by AC line voltage irregularities—
brownouts or over-voltages that can cause audio tonal changes, digital equipment malfunction (such as loss of MIDI programs or other
data), or, in extreme cases, permanent damage. It accepts input voltages over a wide AC voltage range and converts them to a steady,
stable output of 120V, plus or minus five volts. Voltages approximately ±10% beyond that range may be converted to usable levels,
depending on the requirements of the equipment. This stable voltage protects equipment and allows optimal performance. If you
frequently move your rack to different locations, derive power from generators, use excessively long extension cords, travel interna-
tionally, or are in an area prone to brownouts, you will benefit from the use of a Furman P-1800 AR.
DESCRIPTION
True RMS Voltage Regulation Technology
True RMS Voltage Regulation is designed around an ultra-low noise eight-tap toroidal autoformer. A microprocessor within the P-1800
AR monitors the incoming RMS voltage with each cycle, measuring the phase angle in time with the advancing cycle. Most commer-
cial voltage regulators using multiple-tapped transformers switch taps at uncontrolled times. This creates voltage spikes and clicks that
can leak into audio. When a voltage fluctuation requires correction by the P-1800 AR, True RMS Voltage Regulation advances a new tap
with less stress and in turn avoids distortion to the AC waveform. Hysteresis in the P-1800 AR circuits avoids the unnecessary switching
back and forth between the adjacent taps (or “chatter”) found in many commercial voltage regulators. If necessary, True RMS Voltage
Regulation technology can switch taps as often as once each cycle and do so with a shorter recovery time than a commercial voltage
regulator. In addition and unlike voltage regulators that employ ferroresonant transformers, the P-1800 AR is not sensitive to small er-
rors in line frequency, making it ideal for use with generators.
The P-1800 AR has eight outlets on the rear panel and one convenience outlet on the front panel. All are functionally interchangeable.
The outlets are regulated, surge-suppressed, and linearly filtered, making the unit a full-function power conditioner. The autoformer’s
toroidal design assures minimal leakage of stray magnetic fields.
Note: P-1800 AR is for use with AC voltage only. DC voltages should never be applied. Also, it does not change or regulate line
Frequency. The output frequency will always be the same as the incoming frequency.
SMP (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown)
Furman’s SMP (Series Multi-Stage Protection) surge suppression virtually eliminates service calls and costly “down time”. Traditional
surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your
system, and repair of your surge suppressor. Not so with Furman’s SMP. With SMP, damaging transient voltages are safely absorbed,
clamped, and dissipated. Your connected equipment is protected, while your P-1800 AR protects itself!