Copyright © 2017 Funtronix LLC. All rights reserved
7
3.
The horn can be configured to automatically sound for different conditions, or can
be disabled.
The horn can always be sounded manually with the horn button
when the clock/timer is not running.
Each press the “AUTO-HORN ENABLE”
button will cycle through the three different horn alerts described in the table
below:
Horn Mode
Identified
by
Description
1
1 beep
Horn sounds when the countdown clock hits 0:00
time
2
2 beeps
Horn sounds when the clock/timer is started and
stopped, and when the countdown clock hits 0:00
time
3 Display
blink
Disable all automatic horn sounds
4. Press
the
and
buttons to control the clock/timer.
5.
Time can be added or subtracted from the clock/timer at any time. To change the
current clock/timer time, first stop the clock and then press the time-adjust
and
buttons in the lower-right area of the keypad. The time will change in
the following increments:
5.1 If the clock/timer is displaying seconds and tenths of seconds, each press of
the time-adjust buttons will add or subtract 1/10
th
of a second.
5.2 If the clock/timer is displaying minutes and seconds, each press of the time-
adjust buttons will add or subtract 1 second.
5.3 If the clock timer is displaying hours and minutes, each press of the time-
adjust buttons will add or subtract 1 minute.
