Copyright © 2017 Funtronix LLC. All rights reserved
10
SECTION 6: CARE AND MAINTENANCE
Keep your timer clean for optimum viewing of the display.
Never spray cleaning solutions directly onto the timer or keypad.
Use only ammonia-free window cleaning solution.
To clean your timer, spray the cleaner onto a clean cloth. Lightly wipe the timer or
keypad with the damp cloth until clean. To eliminate fine scratches on the front
panel – apply a small amount of carnuba car wax on a terry cloth and lightly wipe the
front panel.
SECTION 7: TROUBLESHOOTING GUIDE
Symptom:
Timer
operates
erratically.
Solution:
Radio signals from nearby devices, such as Bluetooth and WiFi, may
interfere with the operation of the Timer. Changing the radio channel
of the timer should solve the problem. Refer to Section 1 Step 6 to
perform this change.
Symptom:
Keypad remote doesn’t appear to work or the timer fails to connect to
keypad.
Solutions:
1. Distance between timer and keypad is too far. Move the timer
closer to the keypad.
2.
Recharge the keypad. See Section 4 for details.
3. Re-establish radio connection between timer and keypad as
described in Section 1 Steps 4 and 5.
Symptom:
Timer won’t turn on or display is dim.
Solutions:
1.
Screen brightness is on low setting: Press and hold the
button for 3 seconds to change brightness.
2.
Replace the batteries in the timer.
Symptom:
Display ‘blinks’ when a button is pressed on the keypad.
Solution:
This
is
normal.
Symptom:
Display flickers occasionally when no buttons are pressed on the keypad.
Solution:
This may occur if another timer is being setup nearby. If the flicker
persists, change the operating channel by pressing and holding the
button on the keypad as described in Section 1 Step 6.
