Funtek FTK-MT12/GR, Руководство пользователя

Страница: 1 / 24

ENGLISH
FRAN
Ç
AIS
ESP
A
Ñ
OL
DEUTSCH
USER MANUAL
PRECAUTIONS
PRODUCT CONFIGURATION
INSTALL TRANSMITTER BATTERIES
(1) Small parts. Keep out of reach of small children.
(2) Please operate in an open field without any wave interference.
(3) When transmitter is low in power, please stop and change batteries immediately.
(4) On backout after the removal,please do not place discarded to avoid contamination sanitation.
(5) Please store the car and the transmitter in a dry and cool environment.
(6) Keep away from fire, hot or humid environment.
(7) If car battery is wet, be sure to wipe and dry it completely to avoid any damage.
1. Remove the battery cover by loosening the screw on the
back of the transmitter with the included screwdriver.
(Figure 1)
2. lnstall 2 x 1.5V AA batteries (not included) in correct
polarities. (Figure 2)
3. Close the battery cover and tighten the screw. (Figure 3)
NOTICE
- When installing batteries, please make sure the battery
polarity is aligned with the battery holder polarity.
- Do not mix new and old batteries,
or batteries of different types
Figure 1
Car
Transmitter
User Manual
Direction-controlled
Wheel
Hex
Wrench
Phillips
Screwdriver
Li-Ion baterry
pack
Charger
Figure 2 Figure 3