Funkwerk FAC 9400 IP, Руководство по эксплуатации и установке, Страница: 27 / 33

15-pin D-SUB jack (connection to the camera)
Both interface ports are connected with an RJ45 plug with the designation "RS485" on the front of the VNS 100 .
COM-1 is the normal control interface, COM-2 serves exclusively as a service interface.
Signal from DPI 01 viewpoint 15-pin D_SUB jack Signal from camera viewpoint
TXD-A 1 RXD-A
TXD-B 2 RXD-B
ST1 3 ST1
RXD-B 4 TXD-B
available 5 (+) Genlock INV/REST
available 6 -(F)BAS/C
FBAS/BAS (SMB jack) 7 (F)BAS
Video input (DVN140) 8 +(FBAS)/Y/
+ U BATT 9 + U BATT
ST2 10 ST2
GND to ST1 and ST2 11 (-GENL.) GND
RXD-A 12 TXD-A
- U BATT 13 - U BATT
Ground to Pin 8 (video input DVN140) 14 GND
Ground to Pin 7 (SMB jack) 15 GND
2-pin JST plug (On-Air-LED)
An LED with max. 20mA can be connected at this plug connection. It is controlled via the control contact 2 (ST2)
of the camera
.
Pin 2 Pin 1
Assignment of the JST plug:
Pin 1 = pos. signal output
Pin 2 = neg. signal output
27
FAC 9400
01/2013