Funkwerk FAC 9400 IP, Руководство по эксплуатации и установке, Страница: 19 / 33

(GB) English
Safety guidelines
All setting processes during commissioning and service will be carried out mostly via
the control interface (LAN) or on the web site. The device is to be closed for this at all
times. The device may be opened only in the factory by trained and authorized persons
as otherwise long-term damage and a failure of the cooling system are to be expected!
With damage through con-compliance with the operating instruction or through
opening the device will void the warranty.
We will not assume liability for consequential damages!
The FAC 9400 IP may be used only as intended and not outside its specified
operating and environmental conditions.
The FAC 9400 IP may be installed by authorized skilled personnel only.
Valid safety regulations and accident prevention regulations are to be observed.
Switch off the operating voltage prior to installation or servicing works.
Only original parts may be used for installation and servicing works.
The installation site must be in a LPZ 3 lightning protection zone.
The specified minimum bending radii of the cables are to be adhered to.
The specified anti-interference measures must be observed.
Warning!
This is Class A equipment. This equipment may cause radio interference in residential areas. The operator can
demand suitable measures in this case.
19
FAC 9400
01/2013