background image

Mounting Components

5.3 

DAMAGE TO ESSENTIAL VEHICLE COMPONENTS!

Essential vehicle components or wiring can be damaged when drilling mounting holes 

or screwing in self-threading screws. Please make sure there is always sufficient space 

behind the screw holes and drilled holes!

Mounting the electronics box

5.3.1 

Define the mounting points

Making sure that there is at least 

70 mm space for the plug and 

socket connectors. Mark the posi-

tions for the fixing screws.

Mounting the electronics box

For mounting the electronics box, 

use four self-threading screws 

and appropriate washers. We 

recommend size “ST 2,9x25 DIN 

7981”self-threading screws. These 

are ideal for the fixing of the electronics box. Pre-drill the holes with a 2 mm drill.

Mounting the microphone

5.3.2 

Define the mounting location

The microphone holder has a self-adhesive strip on the back. The mounting location should 

have the same form and area as the self-adhesive strip on the microphone holder. The location 

selected must allow the microphone cable to reach the electronics box! Locate the microphone 

with its head in the direction of speech.

Cleaning and degreasing the mounting location

The mounting location must be clean and free from grease and dirt/dust. Clean the proposed 

area with a cleansing product such as methylated spirits. Only use cleansing products that 

do not damage plastics or varnished wood finishes and are themselves free of oils or grease. 

Unsuitable cleansers are, for example,: lighter fluid, acetone, turpentine, trichloroethylene and 

similar products.

Attaching the microphone holder

Peel off the protective backing from the self-adhesive strip. Hold the microphone holder at a 

distance of several millimetres above the desired mounting location. Recheck the positioning. 

Repositioning after mounting is no longer possible. Place the microphone holder on the moun-

ting location and fix by applying short and light pressure.

Attaching the microphone

Attach the microphone by sliding it into the holder and orientate the microphone head in the 

direction of speech.

130 mm

45 mm

70 mm

|

 9

Содержание EGO TS





















Отзывы: