ATR833 / P/N 833-(1xx)-(1xx)
Operation and Installation
2.8.3.2 Channel
Space
In the SET UP–Menu, by pressing the
key, the “Channel Space“
sub menu is opened:
This menu enables to select the desired channel spacing. The actual
channel spacing is marked with an “
(X)
“ at the end of the line.
2.8.4 MIC – Settings
Every microphone input can be individually configured. Therefore
different types of microphones can be used.
Microphone Input Left
Right
standard
Ls.MIC Rs.MIC
dynamic
Ld.MIC Rd.MIC
Per microphone input a maximum of two parallel installed microphones
may be connected. (see 3.6.1)
The MIC-settings are opened by pressing the
key 5 seconds or
longer. A countdown will appear in the upper line on the left side. After
the countdown is finished the MIC-settings menu will be displayed.
For setting MIC, VOX must be set to 5 previously (for VOX -
Settings refer to section 2.4.3 page 12).
With the
rotary knob, the microphone is chosen (for example, “Ld“
for Left/dynamic).
22
Dokument-Nr.: 01.1402.010.71e / Revision: 1.01
