background image

- 20 -

mbosv_eng (25.02.2014)

mbosv_eng (25.02.2014)

- 21 -

Please read the operating instructions carefully before installation and setup.

The relevant regulations must be complied to when working with 230V line voltage, two-wire-

lines, four-wire-lines and ISDN-lines. It is also very important to comply to the regulations 

and safety instructions of working with radio installations.

Please comply to the following safety rules:

- All components may only be mounted and maintained when power is off.
- The modules may only be activated if they are built in a housing and are scoop-proof.
- Devices which are operated with external voltage - especially mains voltage - may only

  be opened when they have been disconnected from the voltage source or mains.
- All connecting cables of the electronic devices must be checked for damage regularly

  and must be exchanged if damaged.
- Absolutely comply to the regular inspections required by law according to VDE 0701

  and 0702 for line-operated devices.
- Tools must not be used near or directly at concealed or visible power lines and conductor 

  paths and also not at and in devices using external voltage – especially mains voltage - 

  as long as the power supply voltage has not been turned off and all capacitors have been 

  discharged. Electrolytic capacitors can be still charged for a long time after turning off.
- When using components, modules, devices or circuits and equipment the threshold

  values of voltage, current and power consumption specified in the technical data must 

  absolutely be complied to. Exceeding these threshold values (even if only briefly) can

  lead to significant damage.
- The devices, components or circuits described in this manual are only adapted for the 

  specified usage. If you are not sure about the purpose of the product, please ask your 

  specialized dealer.
- The installation and setup have to be carried out by professional personnel.

Returning of Old Equipment

According to German law concerning electronic devices old devices cannot be disposed off 

as regular waste. Our devices are classified for commercial use only. According to § 11 of 

our general terms of payment and delivery, as of November 2005, the purchasers or users 

are  obliged  to  return  old  equipment  produced  by  us  free  of  cost.  FunkTronic  GmbH  will 

dispose of this old equipment at its own expense according to regulations.

Please send old equipment for disposal to: 

    

FunkTronic GmbH

 

 

 

 

 

 

 

 

Breitwiesenstraße 4

 

 

 

 

 

 

 

 

36381 Schlüchtern

 

 

 

 

 

 

 

 

GERMANY

>>> Important hint: 

freight forward deliveries cannot be accepted by us.

 

February 2

nd

 , 2006

Subject to change, Errors excepted!

General Safety Remarks

Содержание Major BOS 1V






















Отзывы: