19
SB8A/SB10A U
S e r
G
U i d e
The maximum power that can be supplied from the outputs is 150W into 4Ω. This is equivalent to:
4x F5 in parallel per channel or 2x F81 in parallel per channel.
6.9 Maximum loads
LOAD
MAXIMUM OUTPUT
PER CHANNEL
EXAMPLE
16 Ω
37W
1 x F5
8 Ω
75W
2 x F5 / 1 x F81
4 Ω
150W
4 x F5 / 2 x F81
The SB8A/SB10A’s outputs use the robust and safe Neutrik Speakon connector.
The NL4 is a 4-pin connector, but only two pins are in use. Both NL4 and NL2 cable connectors will mate
with the NL4 socket on the SB8A/SB10A.
6.8 Connectors
“Click”
1.
2.
3.
4.
No application of force is required at any stage of connection or disconnection!
The Speakon is a professional connector and is used as follows;
1. Insert the Speakon plug lining up the wider notch at the top of the socket.
2. Rotate the plug clockwise.
3. When you hear a ‘click’ - the connection is locked.
To disconnect the Speakon:
4. Pull back and hold the silver thumb latch then rotate the Speakon counter-clockwise.
5. Pull the plug from the socket.
