IMPORTANT SAFEGUARDS
6
Installation Location
For safety and optimum performance of this unit:
z
Do not install the unit vertically. Install the unit in a horizontal and stable position.
z
Do not place anything directly on top of the unit.
z
Shield the unit from direct sunlight and keep the unit away from sources of intense heat.
z
Avoid dusty or humid places.
z
Use the unit at temperatures of 10°C - 35°C.
z
Avoid places with insufficient ventilation for proper heat dissipation.
z
Do not block the ventilation holes on the back of the unit.
z
Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
z
Do not handle the power cord with wet hands.
z
Do not pull the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.
z
If, by accident, liquid is spilled on this unit, unplug the power cord immediately and take the
unit to our Authorized Service Center for servicing.
z
Do not put your fingers or objects into the unit other than those specified in the operating
instructions.
FCC WARNING-This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed or used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Canadian DOC statement
DOC Class B Compliance
- This Class B digital apparatus complies with Canadian ICES-
003.
