19
Introduction
Prints Notes
z
Do not touch the printed surface with adhesive tape, rubber goods or plastic, etc.,
and do not leave the printed surface in contact with other objects.
It may cause color loss, change of color or color transfer.
z
Select albums with nylon-based sleeves, polypropylene sleeves or cellophane
sleeves for storing prints.
Other type of sleeves may cause color loss or change of color.
z
To avoid print quality deterioration, do not store prints under the following
conditions:
−
Locations exposed to direct sunlight
−
High temperatures (above 40 °C)
−
High humidity
−
Dust-laden environment
z
Even if prints are stored avoiding the conditions above, change of color or print
quality deterioration may occur.
Ink Cartridge Notes
z
Use the specified Ink cartridge for the printer.
z
Do not touch the Ink ribbon or pull it out from the Ink cartridge.
The allotted number of sheets of paper may not be printed.
z
Rotate the screw hole of the Ink cartridge in the direction of the arrow with the
screw hole pressed to remove slack of the Ink ribbon and then insert the Ink
cartridge.
z
Confirm the direction of the Ink cartridge and insert all the way into the Ink
cartridge slot.
z
Do not reuse the Ink cartridge that has already been consumed.
Condensation Notes
z
If condensation forms inside the printer, stop using the printer and leave it at
ordinary temperatures until the water droplets have evaporated completely.
Water droplets will form on the windows of the warm room. These droplets are called
condensation. They can form on the printer, the Ink cartridge, the Paper tray, and the
paper when transporting these items from cold place to warm place.
z
If condensation forms on the Ink cartridge, the Paper tray or the paper, wipe off
the water droplets and allow to reach to room temperature before use.
z
When transporting the printer, including the Ink cartridge, the Paper tray, and the
paper from cold place to warm place, seal them into a plastic bag to avoid
condensation. Then allow to reach to ambient temperature before use.
