Full Vision TRACK MASTER TMX428, Руководство пользователя

Страница: 31 / 83

TRACKMASTER Ch. 5 Set-up Instructions
317-160-284 Rev 6
TMX428 Owner’s Manual
29
February 2021
Uncrating, Setup and Assembly
TRACKMASTER
®
treadmills are shipped fully assembled and packaged in a knock down condition.
They are designed to pass through a standard 36” door opening measuring at least 35½”. It will be
necessary to remove the door from the jam in most cases if the door is not capable of opening fully
parallel to door opening. After you have uncrated the treadmill and secured the handrail assembly to the
frame, move the treadmill to the area by rolling it on its front wheels
Uncrating Instructions
Tools recommended for uncrating
Safety Knife
1. The treadmill is shipped in a cardboard box with a wood pallet. Cut the 3 nylon straps
holding the cardboard cover to the wood pallet.
2. Remove the cardboard box by lifting straight up from one end to clear the treadmill.
3. Carefully cut the zip tie to open the protective plastic bag.
4. Pull the plastic bag down and fold over all 4 corners of the pallet.
Note: This will prevent the plastic bag being rolled up into the elevation wheels when
removing from wood pallet.
5. Carefully cut the nylon strap securing the treadmill to the pallet.
6. DO NOT REMOVE nylon strap for the handrails.
Caution: DO NOT REMOVE treadmill from wood pallet with a fork lift. The treadmill
may slide off fork causing damage to handrails & side channels.
Warning: The device
weight is 425lbs. This requires 2 people to safely remove it from
the pallet and locate it in the facility.
7. Remove from the wood pallet by lifting from the rear of the treadmill and slide off one
corner at a time.
5
Cut Here
Cut Here
DO NOT CUT