EASIAIR
®
20
20
THE RPE EXPERTS
9
7.2 Filters
The Easiair
®
2020 Powered Air Kit is only compatible with
genuine TH3 PR SL filters and pre-filters supplied by Full
Support Healthcare Ltd. Using any other filters will invalidate
your warranty and could be a serious risk to your health.
Your respiratory device comes pre-fitted with a genuine
Easiair
®
TH3 PR SL filter and pre-filter as standard.
Pre-filters are optional, disposable add-ons that can help
prolong the life of your filter in dirty environments. To attach,
simply sheathe around the filter body before inserting into
the blower unit.
Easiair
®
TH3 PR SL filters have a shelf-life of 5 years from
production. Once open, it is recommended that a filter be disposed of and changed every 6 months, or once soiled/
clogged – whichever comes sooner.
It is essential that the filter type used is suitable for the hazardous environment you will be working in. Please
consult with your Health & Safety Manager or an occupational hygienist if you are unsure.
If a filter is to be reused, store inside the unit to avoid dislodging contaminated matter.
Removing a soiled filter
•
Twist the filter cover anti-clockwise approximately 25mm until it reaches its stopping point and lift off.
•
Whilst wearing gloves, carefully remove the filter and pre-filter (if used) from the unit and dispose.
•
Soiled filters should be disposed of according to your organisation’s policy for biological hazardous waste.
Fitting a new filter
•
Sheath the filter with a pre-filter (if used).
•
Align the filter with the aperture of the unit and push into
position.
•
Slide a pre-filter around the outside of the filter if using.
•
Place the blower unit casing ontop of the filter, aligning
the location slots with the indicator arrows.
•
Push together and rotate clockwise until it ‘snaps’ into
place.
7.3 Belt
The Easiair
®
2020 Powered Air Kit comes with a wipe-clean
PVC adjustable belt.
•
Attach the blower unit onto the belt by passing the inner
belt strap through the loops at the back of the device.
•
Put the belt around your waist with the blower unit to the
back and fasten the two belt ends together
•
Tighten/loosen to fit securely around your waste
