Extended Panel
Full Gauge Controls extended panel allows controllers to be installed in Evolution and Ri lines (the opening
must measure 71x29mm for the extended panel to be installed), as the opening does not need to be
precise for the device to be properly installed. The panel has space to be branded with the company logo
and contact information, and it has 10A switches (250 V ac) that can be used for switching on internal
lighting, ventilation or fan systems.
EASYPROG
IN ORDER TO COMMUNICATE WITH EASYPROG, THE EQUIPMENT MUST NOT
BE LINKED TO SITRAD SOFTWARE.
IMPORTANT
12. OPTIONAL ITEMS - Sold separately
EasyProg
- version 2 or higher
This is an accessory, whose main function is to store the parameters of the controllers. You can load new
parameters from a controller at any time, and download them to a production line (from the same
controller), for example.
It has three types of connection for loading or clearing parameters:
-
Serial RS-485:
Connect it to the controller using the RS-485 network
(only controllers that can access RS-485).
- USB:
If connected to the computer by a USB port, it can use Sitrad's Program Editor.
- Serial TTL:
The controller can connect directly to
EasyProg
by a Serial TTL connection.
11. GLOSSARY
-
°C:
Temperature in degrees Celsius.
-
°F:
Temperature in degrees Fahrenheit.
-
Defr (defrost)
: Defrosting.
-
LOC:
Locked.
-
No:
No.
-
OFF:
Turned Off/ deactivated.
-
ON:
Turned On / activated.
-
Refr:
Refrigeration.
-
SET :
set or configure.
Image VI
PANEL
CLAMPS
CONTROLLER
CONTROLLER
13. ANNEXES - Reference Diagrams
Image V
Y
X
PANEL
To ensure it is properly and safely
installed, connect all leads before
putting the controller in position.
14. WARRANTY
ENVIRONMENTALINFORMATION
Packaging:
The materials used in the packaging of Full Gauge products are 100% recyclable. Try to perform
disposal through specialized recyclers.
Product:
The components used in Full Gauge controllers can be recycled and reused if disassembled by
specialized companies.
Disposal:
Do not incinerate or dispose the controllers that have reached the end of their service as household
garbage. Observe the laws in your area regarding disposal of electronic waste. If in doubt, please
contact Full Gauge Controls
W
ARRANTY
- FULL
GAUGE CONTROLS
Products manufactured by Full Gauge Controls, as of May 2005, have a two (02) year warranty,
as of the date of the consigned sale, as stated on the invoice. They are guaranteed against
manufacturing defects that make them unsuitable or inadequate for their intended use.
EXCEPTIONS TO WARRANTY
The Warranty does not cover expenses incurred for freight and/or insurance when sending
products with signs of defect or faulty functioning to an authorized provider of technical support
services. The following events are not covered either: natural wear and tear of parts; external
damage caused by falls or inadequate packaging of products
LOSS OF WARRANTY
Products will automatically lose its warranty in the following cases:
- The instructions for assembly and use found in the technical description and installation
procedures in Standard IEC60364 are not obeyed;
- The product is submitted to conditions beyond the limits specified in its technical description;
- The product is violated or repaired by any person not a member of the technical team of Full
Gauge Controls;
- Damage has been caused by a fall, blow and/or impact, infiltration of water, overload and/or
atmospheric discharge.
USE OF WARRANTY
To make use of the warranty, customers must send the properly packaged product to Full Gauge
Controls together with the invoice or receipt for the corresponding purchase. As much information as
possible in relation to the issue detected must be sent to facilitate analysis, testing and execution of
the service
These procedures and any maintenance of the product may only be provided by Full Gauge
Controls Technical Support services in the company's headquarters at Rua Júlio de Castilhos, 250 -
CEP 92120-030 - Canoas - Rio Grande do Sul – Brasil
Rev. 03
Copyright 2021 Full Gauge Controls All rights reserved
ECASE PROTECTIVE COVER
Ecase protective cover
Recommended for the Evolution line, it prevents water from
entering the back of the instrument. Protects the product
when washed in the installation site.
Note:
Ecase is compatible with the use of small type Faston
terminals, usually with silicone protection.
Image IX
VYNIL
CONTROLLER
Image VIII
Image VII
Important Note:
Faston connectors must be
protected with covers, preferably
made of silicone.
