8
.8
Adjusting the desired temperature (setpoint)
To select the desired preset, press and hold the
/
key for 2s, until the
[Set,]
message appears, and
then release it
. The message
[sp1]
or
[sp2]
or
[sp3]
will be displayed depending on the currently
active preset and then the value for adjusting the normal setpoint of this preset.
Use the
<
or
>
to
change the value and press (1, 2 or 3) and press
/
to confirm.
Press for 2 sec.
[set,]
This message will
be displayed
press
/
to confirm
[Sp1,]
[,,2.0]
This message will
be displayed
Shows the current desired
temperature (setpoint)
Use
<
or
>
to select
the preset
[Sp2,]
[Sp3,]
;
LIGHT
CONTROL FUNCTIONS
SHUTDOWN
EXIT THE FUNCTION
;
NUMBER OF TIMES THE
DOOR WAS OPENED
CURRENT PROCESS DISPLAY
ERASE MAX. AND MIN.
VALUES
MIN. AND MAX.
TEMPERATURE RECORD
DEFROST (ON/OFF)
FUNCTIONS LOCK
;
;
;
;
;
;
;
;
VIEW TEMPERATURE
NO SENSOR S3 (CONDENSER)
DISPLAY SENSOR S2
TEMPERATURE (EVAPORATOR)
;
;
FUNCTION SELECTION
;
PRESET SELECTION
;
8.6 Visualização da temperatura no sensor S2 (evaporador)
A temperatura no sensor S2 (evaporador) pode ser visualizada pressionando a tecla
;
(toque curto),
até que apareça a mensagem
[Sns2]
. Caso este sensor esteja desabilitado, será exibida a
indicação
[----]
.
F54
FAN-DELAY
MAX. F55
F44
F33
F46
MAX. F41,F42,F43
REFRIGERATION
DEFROST
DEFROST
PRE-
DRAINAGE
F34,F35,F36
IF F24=1
IF F47=
[OFF,]
F29 F30 F31
F25 F26 F27
IF F24=0
MAX. F41,F42,F43
F44
F33
F25 F26 F27
F46
REFRIGERATION
PRE-
DEFROST
DEFROST
DRAINAGE
IF F24=1
IF F24=0
F34,F35,F36
F29 F30 F31
IF F47=
[On,]
FAST FREEZING (ON/OFF)
;
8. QUICK ACCESS MENU AND BASIC OPERATIONS
8.1. Quick Access Menu Map
You can navigate through the function menus by pressing the
;
key (Flatec). See items below for further
details. The map of functions is shown below:
POWER-SAVING
MODE
8.2 Turning power-saving mode on/off
To switch power-saving mode on/off, press
<
with quick touch or use the quick access menu (Item 8.1).
8.3 Switch the light on/off
To switch the light on/off, press
>
with quick touch or use the quick access menu (Item 8.1).
8.
4 Silencing the alarm
To silence the audible alarm, press the
/
key (quick touch).
8.
5 Manual Defrost
To start/stop a manual defrost, regardless of the schedule, press and hold the
<
key for 6s, until the
[dEFr]
message appears. Then release it. The
[On,,]
message will appear when it has started and
the
[OFF,]
message when it has been stopped. It can also be accessed through the quick access
menu (Item 8.1).
8.7 Display process stage and current setpoint
To see which process stage is underway, press and hold the
>
key for 4s, until the
[Proc]
message
appears. Then release it. The stage of the process which is in progress will be displayed, showing the
desired temperature (setpoint) in use, in relation to the current operating mode (normal/power-saving).It
can also be accessed through the quick access menu (Item 8.1).
Quick touch
[ECO,]
[On,,]
[Off,]
on
off
release
the key
This message will
be displayed
Quick touch
[lamp]
This message will
be displayed
[On,,]
[Off,]
on
off
release
the key
Quick touch
Press for 6 sec.
[defr]
This message will
be displayed
[On,,]
[Off,]
on
off
release
the key
release
the key
Quick touch
[SnS2]
Until this message
is displayed
press
/
to confirm
[,,2.0]
Shows the temperature
of sensor 2 (evaporator)
Ex:
[t-2,]
Until this message
is displayed
Current stage
of the process
Shows the current desired
temperature (setpoint)
This message will
be displayed
Press for 4 sec.
[Proc]
release
the key
[dEL,]
[Fan,]
[rEFr]
[Pre,]
[dEFr]
[dRAi]
[----]
Initial delay
Fan delay
Refrigeration
Pre-defrost
[,,2.0]
Ex:
Defrost
Draining
Control
functions
switched off
[t-2,]
Indicates the temperature
in S2
(
[----]
: if disabled)
[SP,,]
(
[sp-e]
: if it is in
power-saving mode)
This message will
be displayed
8
.9 Change Preset
To select the desired preset, press and hold the
/
key for 4s,until the
[rEc,]
. Message appears, and
then release it. Use the
<
or
>
keys to select the desired preset (1,2 or 3) and press
/
to confirm.
Press for 4 sec.
[rec,]
This message will
be displayed
press
/
to confirm
[,,,1]
Preset
Use
<
or
>
to select
the preset
[,,,2]
[,,,3]
Lock indication if
enabled in F44
Lock indication if
enabled in F44
Indication
enabled
Indication
enabled