18
KNOW YOUR PRODUCT
USB Outlet
The USB port (16) 5V DC outlets that come with 1 Amp
& 2.1 Amp rating (fig. 14). It is suitable for charging
mobile phones, MP3 players etc.
12V Battery charging outlet
The DC socket (14) is suitable most lead acid type car batteries. Before charging,
remove the battery from the vehicle. The battery MUST be totally isolated from
any other circuitry.
1.
Connect the positive (+, RED) of the charging
cable and clamp set (18) to the positive battery
terminal. Connect the negative (-, BLACK) to the
negative battery terminal (fig. 15). Do not reverse
the charging cables, or serious damage to the
generator and/or the battery may occur.
2.
Connect the charging cable and clamp set (18) plug
to DC socket (14) (fig. 16). The battery will begin
charging.
3.
When disconnecting, remove the plug from the
inverter generator before un-clipping the clamps on
the battery.
Note:
Do not attempt to charge lithium ion, NiCad or NiMH batteries. The
charging DC socket (14) is only intended for Lead Acid batteries.
OPERATION (cont.)
12V DC 8A
5V DC
2.1A
1.0A
Fig. 15
Fig. 16
12V DC 8A
5V DC
2.1A
1.0A
12V DC 8A
5V DC
2.1A
1.0A
Fig. 14
WARNING!
The battery gives off explosive gases; keep sparks, flames
and cigarettes away. Provide adequate ventilation when charging.
WARNING!
The battery contains sulphuric acid (electrolyte). Contact with
skin or eyes may cause severe burns. Wear protective equipment.
WARNING!
Batteries left unattended can potentially explode, resulting in
serious injury.
