14
Switching on and off
Always use the side handle (4) and firmly hold
the tool by soft grip rear handle (8) during
operations.
The wall chaser is fitted with a lock-off button
to avoid accidental start up.
1.
To switch on, press and hold the lock-off
button (fig. 8).
2.
Squeeze the on/off trigger (7) to start the
wall chaser. Hold the trigger in this position
for continuous use (fig 9).
Note:
Once the tool has started, you can
release the lock-off button.
Note:
For added safety, the concrete grinder is
fitted with a on/off trigger with soft start, this is
an added safety feature which reduces the start
up torque which can cause the tool to twist
quickly. On starting the wall chaser, let it reach
its full speed prior to attempt cutting.
3.
To stop the wall chaser, release the on/off
trigger (7). (fig. 10).
Note:
The mounted diamond discs (10)
protrude out of the guide shoe (16), even at the least preselected cutting depth.
Therefore, never set down the machine on the chaser rollers (1), but always on its
side.
OPERATION
WARNING!
The power supply for this product should be protected by a
residual current device (rated at 30mA or less). A residual current device
reduces the risk of electric shock.
WARNING!
Before switching on,
ensure that the diamond discs (10) do
not touch the workpiece. Otherwise, the diamond discs (10) can kickback,
resulting in possible loss of control over the power tool when switching on.
25
29
20
15
10
5
3
25
29
20
15
10
5
3
25
29
20
15
10
5
3
Fig. 8
25
29
20
15
10
5
3
25
29
20
15
10
5
3
25
29
20
15
10
5
3
Fig. 9
25
29
20
15
10
5
3
25
29
20
15
10
5
3
25
29
20
15
10
5
3
Fig. 10
WARNING!
After use, hold the wall
chaser away from your body until the
motor stops completely.
