background image

21

Wear hearing protection

Wear eye protection

Warning

n

0

/min

No load speed

Revolutions or reciprocations 

per minute

Read Instruction Manual

Ø

Diameter

Warning, this nail gun has contact actuation mode (bump fire)

Its intended uses are for production applications such as pallets, 

furniture, manufactured housing, upholstery and sheathing.

Do not use this tool in bump fire mode for applications such as closing 

boxes or crates and fitting transportation safety systems on trailers and 

lorries. 

Take extra care when changing from one driving location to another in 

bump fire mode and always disconnect the air supply when not in use.

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be  

disposed of with household waste but in an environmentally  

friendly way. Please recycle where facilities exist. Check with  

your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw  

materials. Reuse of recycled material decreases pollution in the 

environment. Please recycle packaging where facilities exist.  

Check with your local council authority for recycling advice.

Содержание FBABN-G15
























Отзывы: