14
SET UP & PREPARATION (cont.)
Loading fasteners
WARNING!
Always connect the tool to pressured air supply before
loading fasteners. Only use fasteners specified in the Specifications in this
manual can be used. Keep the tool pointed away from yourself and others
at all times. Do not load fasteners with the trigger depressed.
1.
Grip the handle firmly with one hand and
with the other hand feed a strip of collated
nails into the magazine(fig. 3).
2.
Slide the magazine latch all the way to
the rear of the magazine. You will need to
depress the small leaver to allow the latch
to slide over the nails (fig. 4).
3.
With the magazine latch behind the
strip of nails, release the lever allowing the latch to slide back up the magazine,
catching the strip of nails on the way. The magazine latch should push the
fasteners up to the driving mechanism (fig.
5). The tool is ready for use.
Note:
Up to 100 fasteners may be loaded in
the magazine.
Fig. 4
Fig. 5
Fig. 3
WARNING!
Do not carry tool with your finger on the trigger. Do not fire
the tool without fasteners in the magazine.
