8
Features can be modified without any notice
V2020320
VOLUME CONTROL
As we said in the first pages of this guide, all DPA leave the factory calibrated with the
same power and equipped with a pre-calibrated volume control on the rear. However, it is
possible to connect an external potetiometer for each input, with which you adjust the volume
of each single channel. The use of a balanced shielded cable and logarithmic potentiomters (type
B) with 10KΩ value is recommended.
GND White Red
Red White GND
If working in bridge and an external control is necessary, use a double potentiometer
.
GAIN CONTROL
Refer to the table in order to determinie the desired input gain. Normally you work at
0dB, buti t is possible to choose between 6-9-12 dB.
Attention, if you work in Bridge, you must have the same gain for both channels.
