Fulgor Milano FM4BM22FBI, Руководство пользователя

Страница: 13 / 22

BEFORE USE
Before first use
You must allow the fridge to settle for at least twenty four hours prior to switching the power on.
It is recommended that you clean the interior of the appliance prior to first use, using a solution of bicarbonate of
soda and warm water and then thoroughly drying the interior. The fridge may have an odour to it at first use. This
will disappear as the appliance cools.
Please note:
The appliance will start 5
℃
for fridge and -18
℃
for freezer and work continuously until it comes down to the
correct temperature. If the appliance is switched off, you should allow five minutes before switching it on again to
prevent unnecessary damage to the compressor. Never store inflammable or explosive items and strong corrosive
acids or alkalis in the appliance. This fridge cools your food by making the inside back of the cavity cold. It is normal
for frost to build up on this surface; it then dissipates and drains through a small drain at the bottom, where it
evaporates harmlessly. The presence of frosting at the back is not a malfunction of the fridge.
12