Fulgor Milano FM4BM22FBI, Руководство пользователя

Страница: 12 / 22

Fig. 5 - Aligning the decor door
Close the door and check the alignment with the other unit
doors. Adjust the decor door by screwing or unscrewing the
adjustment bolts for vertical adjustment and by the help of
the slots on the fixing bracket for other directions. Lock the
screws into place as shown in Fig. 5.
Fitting the decor door base fixings
With the appliance door open, locate the metal decor door
base fixing brackets and screw the fixings to the decor door.
You may need to remove and re-fit these brackets
depending upon the decor door used.
Fitting the decorative cover
Re-fit the decorative cover, that you removed in the first
step, on to the decor door fixing bracket.
Check that the whole door assembly operates smoothly and
that the door seal of the freezer is still creating a seal.
Fig 5
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been
reversed.
With the door closed, use a hair dryer to expand the seal and fill the
gap between the door and the body of the appliance.
Take care not to use the hair dryer too close to the appliance, which
could damage the seal. A distance of approximately 10cm should be
adequate.
When completed, allow the seal and door to cool before touching them.
Once done, the seal will remain in position.
INSTALLATION INSTRUCTION
11