Fulgor Milano CREATIVE CPH 401 ID X, Инструкция пользователя

Страница: 16 / 80

16 17
GB
Operating principle
This is based on the electromagnetic
properties of most cooking containers.
The electronic circuit governs the operation
of the coil (inductor), creating a magnetic
field.
The heat is transmitted by the container to
the food.
Te cooking process takes place as follows:
- minimum dispersion (high performance);
- the removal of the pan (simply lifting it)
automatically stops the system;
- the electronic system allows maximum
flexibility and precision of regulation.
Installation
All installation operations (electrical
connection) must be carried out by people
qualified in compliance with the laws in
force.
For specific instructions, see the installation
section.
Important
This apparatus is not suitable for use by
person (children included) with reduced
mental and physical capacity or with lack of
experience and knowledge unless having
previously received suitable training fot its
use by persons responsable for their safety.
It must be ensured that children do not play
with the apparatus.
Use
First of all, position the pan in the chosen
cooking area.
The absence of the pan display means
the system cannot start.
Cooking and power levels
The cooking and power levels of the
cooking zones are shown on the display
with 7 allotted segments. In accordance with
standards, the power levels are displayed
with numbers from “1” to “9”.
Residual heat indicator
Indicates to the user that the glass is at
a dangerous temperature if in contact
with the area over the cooking zone. The
temperature is determined by means of a
mathematical model and possible residual
heat is indicated by “H” on the corresponding
7 segment display.
Heating and cooling are calculated based
on:
- The selected power level (from “0” to “9”);
- The relay activation time after the cooking
zone has been switched off.
The corresponding display shows “H” until
the zone temperature drops below the
critical level (< 60 °C) according to the
mathematical model.
Turning the cooking surface on
and off
The electronics are activated by turning
the knob. You will hear a short beep. A
display in the glass front shows the setting
of the cooking surface (a value from 0-9
proportional to the rotation of the knob) or
the symbol “u”, meaning there is no pan, “H”
for residual heat an error message.
If a suitable pan is not placed on the cooking
surface within 10 minutes after turning the
knob, surface will go into standby mode with
the display turned off and there will be a
short beep; to use the cooking in this mode,
you have to turn the knob back to position
0 and, while you are turning it, the display
will show “-”.
User instructions