Fujitsu TeamPoS 3600 Series, Инструкция по установке и обслуживанию

Страница: 36 / 165

Team PoS 3600 Series
Installation
D900000338 Issue 3 5-8
5.4 Installing Memory
Caution: Be sure to observe all ESD precautions and power off procedures.
The
Team PoS 3600 Series
motherboard has four memory sockets or slots that can use 1GB or
2GB DDR2 memory in any combination.
1.
Disconnect the AC power cord from the controller.
2. Remove the motherboard tray assembly (See Section 5.2).
3. Insert memory (or additional memory) into an empty socket. (There is only one way the
memory stick will fit.)
4. Push down on memory until both sides lock into place. Check to make sure that both levers
for the socket are seated towards the center.
5. Reinstall the motherboard assembly (See Section 5.2).
Install memory in this
order
4 Memory socket
Slot 0: first memory
Slot 1: third memory
Slot 2: second memory
Slot 3: fourth memory
With memory
in socket 0