Working with the Tablet PC
Replacing the stylus tip
With use, the stylus tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpredictable results when using the stylus.
If your stylus exhibits these problems, replace the stylus tip. To do this, use the supplied tool (1).
1
►
To remove the tip, position it in the gap
between the two ends of the tool supplied.
►
Pinch the two ends of the supplied tool
together so that the tip is
fi
rmly clasped,
then pull it from the barrel.
►
Replace the tip with one of the new tips
that were supplied with your stylus. Insert
the
fl
at end of the tip into the barrel
and exerting gentle pressure, push it
in until it is
fi
rmly in place.
If the tip is worn or damaged, discard it.
Installing a stylus tether
Attach the stylus with a stylus tether to prevent accidentally dropping it or losing it.
►
Fasten the stylus tether to the attachment points on the stylus and the Tablet PC.
Fujitsu
33
