Fujitsu SPARC M10-1, Руководство по обслуживанию

Страница: 104 / 230

d
b
a
c
CPU#0
MEM#00B MEM#00A MEM#01B MEM#01A MEM#10B MEM#10A
MEM#1
1
B
MEM#1
1
A
MEM#13A MEM#13B MEM#12A MEM#12B MEM#03A MEM#03B MEM#02A MEM#02B
Front
Mirroring Mirroring
Table 8-1 Memory installation configurations (4-module units)
Memory module
count
Memory installed
4 a in Figure 8-2 - - -
8 a in Figure 8-2 b in Figure 8-2 - -
12 a in Figure 8-2 b in Figure 8-2 c in Figure 8-2 -
16 a in Figure 8-2 b in Figure 8-2 c in Figure 8-2 d in Figure 8-2
Table 8-2 Memory installation configurations (8-module units)
Memory module
count
Memory installed
8 a in Figure 8-2 b in Figure 8-2 - -
16 a in Figure 8-2 b in Figure 8-2 c in Figure 8-2 d in Figure 8-2
Figure 8-2
Memory installation positions and units
8.2.2 Checking memory information
Check the type and size of the memory by using the showhardconf command of the
XSCF firmware.
1.
Log in to the XSCF shell.
2.
Execute the showhardconf command to check the memory information.
The capacity and rank of the memory are displayed.
Fujitsu M10-1/SPARC M10-1 Service Manual
･
November 2014 88