Fujitsu SPARC M10-1, Руководство по обслуживанию

Страница: 148 / 230

Caution -
To completely shut down the system, all the power cords must be
removed. If the power cords are not removed, an electrical failure may occur.
XSCF> showlogs error
Note -
In the case of a dual power feed, make a note of the positions of the power cords
before removing them to ensure that they are reinstalled correctly.
12.2.5 Precautions for reduction
Note the following points when reducing a PCIe card.
■
When reducing a PCIe card, remove PCIe card from the PCIe riser and then install
the PCIe card filler. Mount it on the motherboard unit. The PCIe card filler is
easily removed. Be careful not to drop it.
12.3 Enabling the Removal of a PCI
Express Card
This section describes the preparations that must be completed prior to the removal
of a PCIe card.
1.
Open the rack door.
2.
Log in to the XSCF.
3.
Execute the showlogs command to identify the PCIe card requiring
maintenance.
4.
Confirm the hardware and software configurations.
For details, see " 4.2 Confirming the System Configuration ."
5.
Stop the system.
For details, see " 5.2 Stopping the System ."
6.
Remove all the power cords from the power supply unit.
For details, see " 5.3.1 Removing the power cords ."
Fujitsu M10-1/SPARC M10-1 Service Manual
･
November 2014 132