Fujitsu SPARC Enterprise T5440 Server, Руководство по обслуживанию, Страница: 100 / 214

74 SPARC Enterprise T5440 Server Service Manual • July 2009
1. At the Solaris prompt, issue the
cfgadm -al
command to list all drives in the
device tree, including drives that are not configured. Type:
This command should identify the
Ap_id
for the hard drive you wish to remove,
as in CODE EXAMPLE: Sample
Ap_id
Output on page 75 .
2. Issue the
cfgadm -c unconfigure
command to unconfigure the disk.
For example, type:
where
c0:dsk/c0t1d1
is the disk that you are trying to unconfigure.
3. Wait until the blue Ready-to-Remove LED lights.
This LED will help you identify which drive is unconfigured and can be removed.
4. On the drive you plan to remove, push the hard drive release button to open the
latch ( FIGURE: Removing a Hard Drive on page 74 ).
FIGURE:
Removing a Hard Drive
Caution –
The latch is not an ejector. Do not bend the latch too far. Doing so can
damage the latch.
# cfgadm -al
# cfgadm -c unconfigure c0::dsk/d1t1d1