Fujitsu SPARC Enterprise T2000, Руководство администратора, Страница: 63 / 98

Chapter 2 Managing RAS Features and System Firmware 41
▼ To Reconfigure a Device Manually
1. At the
sc>
prompt, type:
where the asr-key is any device identifier from
TABLE 2-5
Note –
The device identifiers are not case sensitive. You can type them as uppercase
or lowercase characters.
You can use the ALOM CMT
enablecomponent
command to reconfigure any
device that you previously unconfigured with the
disablecomponent
command.
Displaying System Fault Information
ALOM CMT software lets you display current valid system faults. The
showfaults
command displays the fault ID, the faulted FRU device, and the fault message to
standard output. The
showfaults
command also displays POST results. For
example:
Adding the
–v
option displays the time:
IOBD/PCIEb
PCI-E leaf B (/pci@7c0)
TTYA
DB9 Serial Port
MB/CMP0/CH
channel_number /R rank_number /D dimm_number DIMMS
sc> enablecomponent
asr-key
sc> showfaults
ID FRU Fault
0 FT0.FM2 SYS_FAN at FT0.FM2 has FAILED.
sc> showfaults -v
ID Time FRU Fault
0 MAY 20 10:47:32 FT0.FM2 SYS_FAN at FT0.FM2 has FAILED.
TABLE 2-5
Device Identifiers and Devices (Continued)
Device Identifiers (Continued) Devices (Continued)