Fujitsu SPARC Enterprise T2000, Руководство администратора, Страница: 53 / 98

Chapter 2 Managing RAS Features and System Firmware 31
Controlling the Locator LED
You control the Locator LED from the
sc>
prompt or by the locator button on the
front of the chassis.
Steady On Steady State If blue is on, a service action can be performed on the
applicable component with no adverse
consequences.
For example: the OK-to-Remove LED
Yellow/Amber Off Steady State
Slow Blink 1Hz repeating
sequence, equal
intervals On
and Off. This indicator signals new fault conditions. Service is
required.
For example: the Service Required LED.
Steady On Steady State The amber indicator stays on until the service action
is completed and the system returns to normal
function.
Green Off Steady State
Standby Blink Repeating
sequence
consisting of a
brief (0.1 sec.)
ON flash
followed by a
long OFF
period (2.9 sec.) The system is running at a minimum level and is
ready to be quickly revived to full function.
For example: the System Activity LED
Steady On Steady State Status normal; system or component functioning
with no service actions required
Slow Blink A transitory (temporary) event is taking place for
which direct proportional feedback is not needed or
not feasible.
TABLE 2-2
LED Behaviors with Assigned Meanings (Continued)
Color Behavior Definition Description