Fujitsu SPARC Enterprise T2000, Руководство администратора, Страница: 41 / 98

Chapter 1 Configuring the System Console 19
The prompt displayed on the terminal or shell tool tells you which channel you are
accessing:
■
The
#
or
%
prompt indicates that you are at the system console and that the
Solaris OS is running.
■
The
ok
prompt indicates that you are at the system console and that the server is
running under OpenBoot firmware control.
■
The
sc>
prompt indicates that you are at the system controller.
Note –
If no text or prompt appears, it might be that no console messages were
recently generated by the system. If this happens, pressing the terminal’s Enter or
Return key should produce a prompt.
To reach the system console from the system controller,
■
Type the
console
command at the
sc>
prompt.
To reach the system controller from the system console,
■
Type the system controller escape sequence,
By default, the escape sequence is
#.
(Pound-Period).
For more information about communicating with the system controller and system
console, see:
■
“Communicating With the System” on page 1
■
“ALOM CMT
sc>
Prompt” on page 19
■
“OpenBoot
ok
Prompt” on page 21
■
“Accessing the System Controller” on page 7
■
The ALOM CMT guide for your server
ALOM CMT
sc>
Prompt
The ALOM CMT system controller runs independently of the server and regardless
of system power state. When you connect your server to AC power, the ALOM CMT
system controller immediately starts up, and begins monitoring the system.
Note – To view ALOM CMT system controller boot messages, you must connect an
alphanumeric terminal to the serial management port before connecting the AC
power cords to the SPARC Enterprise T2000 server.