manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Справочное руководство Xscf, Страница: 262 / 560

Поделиться
Скачать
Fujitsu SPARC Enterprise M3000 Скачать руководство пользователя страница 262

setnameserver(8)

238

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010

OPERANDS

The following operand is supported:

EXTENDED

DESCRIPTION

■

If multiple DNS servers are specified, the servers are used in the order specified.

■

The registered DNS search path is used, as in the case where you use the 

nslookup

(8) command and refer to the DNS server for the host name. The host 

name that you specified in the 

nslookup

(8) command will be appended with 

the domain name which registered in the DNS search path, and be referred to the 
DNS server in the FQDN format.

■

If multiple search paths are registered, domain names are assigned in order of 
registration and referred to the DNS server.

■

If you set the DNS search path, you must also specify the DNS server.

-c

 

del

Deletes specified DNS servers. If the 

-c

 option is omitted, "

-c

 

add

" is assumed specified. When deleting multiple DNS servers, 

the servers are deleted in the order they are specified. See 

EXAMPLE 3

.

-c

 

delsearch

Deletes specified DNS search path. If the 

-c

 option is omitted, 

"

-c

 

add

" is assumed specified. When deleting multiple DNS 

search paths, the search paths are deleted in the order they are 
specified.

-h

Displays usage statement. When used with other options or 
operands, an error occurs.

address

Specifies the IP address of a DNS server to be added or deleted 
using four sets of integers. Up to three addresses delimited by the 
space can be specified. The following 

address

 form is accepted:

xxx

.

xxx

.

xxx

.

xxx

xxx

An integer from 0–255. Zero suppression can 
be used to specify the integer.

You cannot specify the loopback address (127.0.0.0/8), the 
network address, or a broadcast address.

domainname

Specifies the domain name of the DNS search path to be 
registered or deleted. You can use a RFC 1034-compliant format. 
The label element can contain letters (a to z, A to Z), numbers (0 
to 9), and the special characters "-" (hyphens) and "." (period). 
The domain name must begin with a letter and end with either a 
letter or number. A "." (period) can be used as delimiter. You can 
specify up to five domain names, each separated by a space, but 
the total number of characters cannot exceed 256.

Содержание SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов