Fujitsu SPARC Enterprise M3000, Справочное руководство Xscf, Страница: 165 / 560

restoredefaults(8)
System Administration 141
NAME
restoredefaults - delete the setting and the log information that stored in the server
or the XSCF unit, and restore it to the state as of the factory shipment
SYNOPSIS restoredefaults
-c
range
restoredefaults
-h
DESCRIPTION The
restoredefaults
(8) command deletes the setting and the log information
that stored in the server or the XSCF unit, and restores it to the state as of the
factory shipment.
As the range of restoration, one of the following can be specified:
Privileges You must have
platadm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
In case the
restoredefaults
(8) command executed to the standby XSCF,
■
when you specify
factory
, it results in an error;
■
when you specify
xscfu
, only the standby XSCF will be initialized.
XSCF unit (
xscfu
)
Restores the following information in XSCF unit to the state as of the factory
shipment:
■
Various setting information in XSCF
■
Log information that stored in XSCF unit
■
Backup information of operator panel
server (
factory
)
Restores the setting and the log information that stored in operator panel and
XSCF unit to the state as of the factory shipment.
-c
range Specifies the target of restoration. In range , one of the following
values can be specified:
xscfu
Restores the XSCF unit.
factory
Restores the server.
-h
Displays usage statement. When used with other options or
operands, an error occurs.