Assembly Instructions
SMARTCASE S500
__________________________________________________________________________________________________________________________________________________________
Page 8 of 18
www.fujitsu.com
WLAN module / M.2. module assembly
First remove the M.2 mounting screws.
Insert M.2 module
angular
into the
socket (
while paying attention to the coding / notch
).
Both modules, as shown in the picture, have to be touched on the outside edges only.
For the M.2 SSD (left socket), the assembly nut and screw are pre-installed for a 2240mm module.
In order to install a 2260 module, the 2240 assembly nut has to be moved to the 2260 position first.
For a 2280 module, the 2240 assembly nut has to be removed, and the pre-installed M.2 WLAN (2230) nut
is used for both M.2 2230 WLAN and M.2 2280 SSD
Recommended torque for the M.2 screw is 0.2Nm, and 0.3Nm for the nut.
Pay attention
to the notch
2240 screw /
nut position
Common 2280/2230
screw / nut position
2260 screw /
nut position
