Fujitsu SMARTCASE S500, Руководство по сборке

Страница: 7 / 18

Assembly Instructions SMARTCASE S500
__________________________________________________________________________________________________________________________________________________________
Page 7 of 18 www.fujitsu.com
Step 3 Inserting additional Modules (Memory / M.2 / …)
The following picture shows some possible M.2 modules
Attention : Do not touch any pins! Touch the memory at the outside edges only.
Do not stick a barcode onto any modules!
The following procedure is recommended in order to ensure secure electrical contact:

Insert the memory angular and
pay attention to the notch!

Remove the memory again
completely from the DIMM
socket!

Insert memory again

Press down the memory until it
clicks into place

Do not press in the middle of the
memory, but press down on the
outside edges
Mainboard
M.2 2242
SSD/ Storage
M.2 SSD / Storage
2280
M.2 2230
WLAN
Memory