manualshive.com logo in svg

Fujitsu SCENIC6511, Руководство по эксплуатации, Страница: 41 / 57

Поделиться
Скачать
Fujitsu SCENIC6511 Скачать руководство пользователя страница 41

System expansions

A26361-K520-Z100-1-7619

41

Installing/removing a chipcard reader

Open the system unit (see "

Opening the system unit

").

Installing a chipcard reader

Remove the cover.

3

1

2

Fix the cable on the chipcard reader (1) and on the connector for the chipcard reader on the
system board (see the Technical Manual of the system board).

Lift the chipcard reader into the system unit (2).

Push the chipcard reader in the direction of the arrow (3) until it clicks into position. Press
downward and toward the drive cage while doing so.

i

With the chipcard reader connected, no devices may be connected to serial port 2.

Removing a chipcard reader

2

3

1

4

Pull the cable off the chipcard reader and off the connector for the chipcard reader on the
system board (see the Technical Manual of the system board).

Press on the clip (2) and pull the chipcard reader in the direction of the arrow (3).

Lift the chipcard reader out of the system unit (4).

Mount the cover in place of the chipcard reader. It may be necessary to secure the cover with a
screw.

Содержание SCENIC6511


























































Отзывы:

Нет отзывов