Fujitsu SCENIC6511, Руководство по эксплуатации

Страница: 36 / 57

System expansions
36
A26361-K520-Z100-1-7619
Removing an accessible drive
Open the system unit (see " Opening the system unit ").
Pull the data and the power supply connectors from the desired drive.
i
Should the chipcard reader get in the way of the accessible drive during installation, then
remove the reader (see "
Installing/removing a chipcard reader ").
1
2
A
B
A = Position of the screw for the upper drive
B = Position of the screw for the lower drive
Remove the relevant screw (1) and take the drive out of the system unit (2).
A
B
Insert the shielding plate (B) on the right-hand side on the installation bay and press it in.
Press the plastic drive cover (A) into the front panel until it snaps in place.
If you have removed the chipcard reader, then reinstall it.
Close the system unit (see " Assembling the system unit ").
i
If necessary, you must adapt the entry for the drive in the Setup menu.