Fujitsu PTM900, Руководство пользователя

Страница: 9 / 40

PTM900 Mainboard Manual
2-1
Chapter 2
Installation Procedures
The mainboard has several user-adjustable jumpers that allow you to configure the
system to suit your requirements. This chapter contains information on the various
jumper settings on your mainboard.
To set up your computer, you must complete the following steps:
Step 1 - Set system jumpers.
Step 2 - Install memory modules.
Step 3 - Install the Central Processing Unit (CPU).
Step 4 - Install expansion cards.
Step 5 - Connect ribbon cables, cabinet wires and power supply.
Step 6 - Set up BIOS software.
Step 7 - Install supporting software tools.
WARNING: Excessive torque may damage the mainboard. When using
an electric screwdriver on the mainboard, make sure that the torque is
set to the allowable range of 5.0 ~ 8.0kg/cm.
Mainboard components contain very delicate Integrated Circuit (IC) chips.
To prevent static electricity from harming any of the sensitive components,
you should follow the following precautions whenever working on the
computer:
1. Unplug the computer when working on the inside.
2. Hold components by the edges and try not to touch the IC chips, leads or
circuitry.
3. Wear an anti-static wrist strap.
4. Place components on a grounded anti-static pad or on the bag
that came with the component whenever the components are
separated from the system.