Fujitsu PRIMERGY TX1320 M3, Руководство по эксплуатации

Страница: 49 / 92

TX1320 M3
Operating Manual 49
Hardware installation
5.2 Setting up the server
Ê
Set up the server.
I
Note that the server may be operated in the vertical (see section
"Positioning the server vertically" on page 50 ) or horizontal position
(see section "Positioning the server horizontally" on page 53 ).
V
CAUTION!
– The device must be protected from direct sunlight.
– The required minimum distances for operation and maintenance
areas must be adhered to.
– The server must be accessible at the rear for connection to other
devices (e.g. memory subsystem).
– The mains plug must be accessible easily and safely.
– There must be a clearance of at least 200 mm in front of and
behind the server to ensure adequate ventilation of the system.
Ê
Wire the server. Follow the instructions in sections "Connecting devices to
the server" on page 54 and "Notes on connecting/disconnecting cables" on
page 59 .
Ê
Connect the server to the mains (see section "Connecting the server to the
mains" on page 56 ).