Fujitsu PRIMERGY TX1310 M5 Скачать руководство пользователя страница 63

Страница: 63 / 265

5.1.2

Removing backup and optical disk media

▶

Ask the system administrator to eject all remaining backup or optical media

from the backup drive or ODD before removing it from the server.

▶

If the backup media cannot be ejected by conventional means, and it is

mandatory that the cartridge be removed prior to returning the drive for

repair or disposing it, a manual tape extraction needs to be performed.
Please contact Fujitsu support, if "forcible" tape ejection is necessary.

Fujitsu does not assume responsibility for any damage to the tape drive,

the data cartridge/tape or for the loss of any data resulting from manual

tape extraction procedures.

5.1.3

Verifying and configuring the backup software

solution

This task only applies to Japan.

Depending on the backup software solution, it may be necessary to disable or

delete the backup drive from the backup software drive list before starting the

maintenance task.

For more information on suitable backup software solutions and related

documentation, see the Fujitsu web pages.

5.2

Completing the maintenance task

5.2.1

Updating or recovering the BIOS

After replacing the system board or a CPU, it is essential to upgrade the BIOS

to the latest version. The latest BIOS version are available from the Fujitsu

support internet pages at:

https://ts.fujitsu.com/support/

Basic software procedures

TX1310 M5

Upgrade and Maintenance Manual

Содержание PRIMERGY TX1310 M5










































































































































































































































































Результаты поиска

Содержание PRIMERGY TX1310 M5

Отзывы:

Fujitsu PRIMERGY TX1310 M5, Руководство по модернизации и обслуживанию, Страница: 63 / 265

Результаты поиска

Содержание PRIMERGY TX1310 M5

Отзывы: