Fujitsu PRIMERGY SX10 S2, Руководство пользователя

Страница: 83 / 94

5 Troubleshooting
83
E
The backup unit cannot be turned on.
The backup unit cannot be turned off.
Lit up green
What is the status of the Power LED?
No No
No No
No No
Yes
Refer to the following according to
the power switch setting.
- "Even when the power switch is set to "|",
the power cannot be turned on." (p.79)
- "Even when the power switch is set to "R",
the power cannot be turned on." (p.81)
Drive Power LED of the target
drive bay is lit green?
When setting the power switch to
"|", the drive bay Drive Power LED
is lit green?
Check "The SCSI cable (for server connection) is connected correctly?" (p.81) onward
in "Even when the power switch is set to "R", the power cannot be turned on."
This product may fail.
Contact maintenance support.
No No
This product may fail.
Contact maintenance support.
Off
Lit up amber
Blinking green
The power cable between the I/O
module and drive in this product is
connected correctly?
Contact maintenance support.
The power cable between the I/O
module in this product and drive is
come down?
Connect it properly.
"2.3.3 How to install a SCSI cable kit" (p.61)
"2.4.2 How to Install a Backup Unit" (p.66)
Lit up green
What is the status of the Power LED?
Refer to the following according to
the power switch setting.
- "Even when the power switch is set to " ",
the power cannot be turned off." (p.80)
- "Even when the power switch is set to "R",
the power cannot be turned off." (p.82)
This product may fail.
Contact maintenance support.
Off
Lit up amber
Blinking green