3 Installing in a Rack
73
E
7
Install this product in the rack.
1. Insert the inner rails attached to this product straight on the grooves in the slide
rails.
2. Release the locks on both sides of the inner rails (press up for the right side and
press down for the left side), and slide this product backward slowly to install it
in the rack.
3. Insert and pull out this product from the rack several times to check that the
slide rails move smoothly without any problems.
CAUTION
When inserting the inner rails, check that they are attached to the retainers
properly.
Do not push the inner rails into the slide rails by force. Fittings of the inner
rails may be trans-formed, and the rails do not move normally.
Injury
• Be careful not to pinch your fingers or catch any clothing when sliding
this product into the cabinet. This could cause injury.
Press the lock up to release.
[Right side rail]
* For the left side rail, press it down to release.
When installing this product, check
that the retainer is slid to the front of
the rail.
Retainer
Содержание PRIMERGY SX10 S2
