62
Operating manual
RX300
S3
Starting up Hot-Plug PCI Slots
Preparation for Use and Operation
5.4
Starting up Hot-Plug PCI Slots
V
CAUTION!
Please note the safety instructions in
In addition to standard slots, the server also has two hot-plug PCI slots. These
hot-plug PCI slots allow boards to be installed and removed during operation
assuming the operating system supports this functionality.
Every hot-plug PCI slot is assigned two indicators that signal the current status
of the slot. The indicators are visible externally on the rear of the server (see
The possible indicator modes and their meaning are explained in
and
If it is attempted to remove the relevant board despite the illuminated green
indicator, the slot is automatically powered off to protect the board and the
system from any damage (an NMI is initiated/blue screen, system reboot
necessary).
V
CAUTION!
Not all currently available operating systems support the hot-plug
functionality.
The PCI hot-plug software (
PCI Card HotReplace)
is located on the
ServerStart
DVD supplied or is installed with the
ServerView
agents. You will find additional
information on installation and operation in the file “README for the PCI Hot
Plug Software V3.0” on the
ServerStart
DVD.
PCI components may only be installed and removed by personnel with the
appropriate technical training.
Содержание Primergy RX300 S3
