Fujitsu PRIMERGY PG-R1CK1, Руководство пользователя, Страница: 43 / 79

iv
Do not place this system in a humid, dusty, oily, or smoky area.
Do not place this system in an area with poor ventilation nor in
an area close to fire or other sources of heat.
When installing or removing the server from the rack, turn off the
server, all peripheral devices, the display, and any other
connected devices. Also unplug all power cords. Failure to do so
can lead to electric shock.
Contact your maintenance engineer to install or remove a server
from the rack cabinet.
•
Do not expose this device to direct sunlight or place near
heating appliances. Do not place in an area where the tem-
perature drops below 10
°
C, as this could damage the server.
Do not string the connecting cables in a way that they
become trip hazards. This could damage the server and
cause injury.
•
Do not use the server in a salty environment.
•
Do not obstruct the ventilation slots.This could cause over-
heating and shorten the life of the equipment.
•
Do not string the connecting cables in a way that they
become trip hazards. This could both damage the server
and cause injury.
•
Do not place the server in areas where strong magnetic
fields are generated, such as near TVs and speakers, as this
could damage the server.
•
Leave a space of at least 20cm between the backside of the
device and the wall. Poor ventilation traps the heat which
can lead to fire.
•
Move the unit with care. Shut down all power sources and
disconnect all cables and peripherals (e.g. mouse, key-
board, etc.). Also be aware that depending on the hardware
options installed, a rackmount can weight up to 20kg.